KezdőlapEnglishPlant-based cup coating: a cellulose layer could replace the plastic liner in...

Plant-based cup coating: a cellulose layer could replace the plastic liner in coffee cups

If you like our site, mark us as a preferred source on Google — so you’ll see our articles more often in search!

★Mark us as a preferred source

Researchers at the University of Waterloo in Canada have developed a plant-based cup coating made entirely from cellulose that could replace the polyethylene (PE) liner in single-use paper cups. In laboratory tests, the layer of cellulose acetate and cellulose nanocrystals stayed intact in hot water, cooking oil and a range of solvents, and – unlike conventional PE-lined cups – it did not crack or shed material during abrasion testing. Because the cup and its coating come from the same family of materials, the development could also simplify paper cup recycling.

In short: The plant-based cup coating is made from cellulose acetate and cellulose nanocrystals, and in laboratory tests it outperformed polyethylene-lined coffee cups in abrasion, chemical and heat resistance. The development is still at the laboratory stage: industrial production, food-contact approval and its legal classification remain open questions.

What is wrong with the polyethylene liner?

A takeaway coffee cup is made of paper, but its liquid barrier comes from a thin, fossil-based polyethylene layer on the inside. This composite structure causes problems at two points in the cup’s life.

The first is recycling. In conventional paper mill pulping, the PE liner does not separate from the fibres on its own, so processing cups requires dedicated separation technology. One example is James Cropper’s CupCycling™ process, which we covered in our article on the storybook made from coffee cups – but this remains the exception, and a large share of cups still ends up in landfill or energy recovery.

The second is material release during use. According to the University of Waterloo’s tests, the surface of plastic-lined cups degrades under mechanical stress and releases particles, which the researchers say suggests that microplastics could enter the drink and, from there, the body. Processing plastic layers can also release microplastics on the recycling side – a topic we explored in detail in our article on plastic recycling wash water.

How is the plant-based cup coating built?

The research, authored by Sayan Ganguly, Pei Li and Xiaowu (Shirley) Tang, combines two plant-derived components:

  • cellulose acetate (CA): the film-forming matrix that creates a continuous layer on the paper surface;
  • cellulose nanocrystals (CNCs): nanoscale, high-strength cellulose crystals that act as reinforcement within the cellulose acetate matrix.

The formulation is dispersed using a sealed, shear-free process and then applied to a porous paper substrate by blade coating. The finished coating bridges the paper’s larger pores and partially integrates with the upper fibre network. Spectroscopic analysis shows physical blending rather than new chemical bonds, reinforced by hydrogen-bonding interactions between the cellulose acetate, the nanocrystals and the paper fibres. Raman spectroscopy also revealed shifts at the coating–substrate interface consistent with stronger bonding and good chemical compatibility.

The material was not originally developed for packaging: the team was investigating lightweight, renewable materials for aerospace applications and, in the process, recognised its potential as a protective coating for paper products.

What did the laboratory tests show?

The researchers examined the coating’s thermal, mechanical, chemical and gas-barrier performance. The key results:

  • Heat resistance: thermogravimetric measurements showed that adding nanocrystals delayed the main polymer-chain degradation and increased char yield. According to the University of Waterloo, the coating remained stable after prolonged exposure to boiling water.
  • Mechanical strength: tensile strength and modulus rose steadily with nanocrystal content, peaking at 5 wt% CNC, while toughness improved up to 3 wt%.
  • Chemical resistance: during a five-day immersion in acidic, basic and various solvent media, the film showed no lift-off and no channel formation. It also proved resistant to cooking oil.
  • Oxygen barrier: cellulose acetate alone reduced oxygen transmission by more than an order of magnitude compared with uncoated paper, and nanocrystal reinforcement brought it into the low-permeability range.

Electron microscopy showed progressively denser surfaces and stronger fibre–matrix interlocking as nanocrystal content increased, which explains the gains in mechanical performance.

Abrasion and particle release: what happens inside the cup?

Perhaps the most striking part of the study is the extended abrasion test, in which the cellulose coating was compared with commercially available polyethylene-lined cups.

During testing, the surface of the PE-lined cups became progressively pitted, boundaries opened up and flake-like detachment appeared. Under the same conditions, the cellulose acetate–nanocrystal coating remained cohesive, well-adhered and low in defects. In the university’s announcement, Shirley Tang, professor in Waterloo’s Department of Chemistry, said she was struck by how easily some plastic liners shed particles, and that creating a high-performance coating without conventional plastics is what makes the work so promising.

It is important to note, however, that the abrasion test is an accelerated laboratory test. The study does not quantify how many particles actually enter a drink during everyday use of a coffee cup.

Thinner paper, less material

One practical advantage of the coating is that it retained its protective properties on lightweight paper – the researchers even tested it on brown paper towels. According to Sayan Ganguly, a research associate in the Tang Nanotechnology Lab, this means cups could be made from much thinner paper while still achieving the required durability, potentially reducing material use and manufacturing costs.

From a waste management perspective, this is source reduction at work: less fibre, less weight and less waste per cup. Beyond coffee cups, the researchers see opportunities in other food packaging where manufacturers want to replace plastic with renewable materials.

What does this mean under Hungarian and EU rules?

Since 1 July 2026, Hungary has banned placing on the market single-use plastic cups and paper cups whose plastic coating exceeds 10 per cent by weight; the ban also covers lids. This leaves reusable cups and paper cups with less than 10 per cent plastic content on the market.

A legal nuance is worth highlighting here. The EU Single-Use Plastics Directive (SUPD, (EU) 2019/904) excludes from its definition of plastic only natural polymers that have not been chemically modified. Cellulose acetate is produced by acetylating cellulose – a chemical modification. It is the same material used in cigarette filters, which EU rules treat as plastic products. From a professional standpoint, it is therefore likely that a cellulose acetate-based coating would legally qualify as plastic, even though it is plant-derived and may be recyclable together with the paper.

In practice, this could have two consequences:

  • a sufficiently thin coating would likely stay below the 10 per cent threshold, so the cup could be placed on the Hungarian market;
  • it could probably not be marketed as “plastic-free”, and marking and extended producer responsibility obligations arising from the SUPD might apply.

The final legal classification will depend on the production technology, the exact composition and regulatory interpretation – the classification of cellulose nanocrystals, for example, would require separate assessment.

Where does the development stand, and what is still missing?

The study offers strong laboratory evidence that a cellulose-based layer can deliver the barrier performance needed for hot beverages. Before market launch, however, several questions must be answered:

  • Scale-up: the sealed, shear-free dispersion and blade coating must be scaled to paper machine speeds and volumes.
  • Cost: the industrial price and availability of cellulose nanocrystals will be decisive for competitiveness.
  • Food safety: migration testing and approval under food-contact materials rules are still to come.
  • Real-world recyclability: mill trials must confirm how the cellulose acetate layer behaves during pulping and whether it truly needs no separate removal.

It is also worth remembering that a better single-use cup does not replace waste prevention. We presented Germany’s experience with reusable systems in our analysis of the WWF reports, and a working hospital cup system in our article on the UK project by Borealis and partners. From 2028, the PPWR will also require food service outlets to offer reusable packaging, so single-use and reusable solutions are likely to coexist and complement each other.

Conclusion

The University of Waterloo’s plant-based cup coating shows that the plastic liner in paper cups can, in principle, be replaced by a layer from the same family of materials as the cup itself. In the laboratory, the combination of cellulose acetate and cellulose nanocrystals produced a heat-resistant, chemically resistant, oxygen-tight and abrasion-resistant coating that also works on thinner paper. The result is promising, but the waste management benefit will only become real once industrial production, food-safety approval and paper mill recyclability are proven – and once its legal classification becomes clear.


Frequently asked questions about the plant-based cup coating

What is the new plant-based cup coating made of?

The coating consists of two plant-derived components: cellulose acetate, which forms the film matrix, and cellulose nanocrystals, which act as reinforcement. University of Waterloo researchers disperse the mixture using a sealed, shear-free process and apply it to paper by blade coating, where it forms a continuous layer that bridges the paper’s pores.

How does the cellulose coating compare with a polyethylene liner?

In laboratory abrasion tests, the surface of polyethylene-lined cups became pitted and flaked, while the cellulose coating stayed cohesive and well-adhered. It showed no lift-off after five days in acidic, basic and solvent media, remained stable in hot water and cooking oil, and cut oxygen transmission by more than an order of magnitude versus uncoated paper.

Does the cellulose coating make paper cups easier to recycle?

The research suggests so, but it has not yet been proven at industrial scale. Because both the cup and the coating are cellulose-based, the need to separate a plastic liner – today the main barrier to paper cup recycling – could be reduced. How the cellulose acetate layer behaves during paper mill pulping still needs to be confirmed in mill trials.

Can you buy cellulose-coated coffee cups yet?

Not yet. The plant-based cup coating is still a laboratory result, published in 2026 in ACS Sustainable Chemistry & Engineering. Industrial-scale production, cost assessment, approval under food-contact materials rules and testing of paper mill recyclability are still ahead, so no commercial launch date has been announced.

Is a cellulose acetate coating legally plastic-free?

Probably not. The EU Single-Use Plastics Directive excludes only natural polymers that have not been chemically modified from its definition of plastic, and cellulose acetate is made by chemically modifying cellulose. In Hungary, the coating would therefore likely fall under the 10 per cent plastic limit for paper cups, which a thin layer could well meet.


🔗 Official sources and references: 👉

Consistent structure, quick answers: every article is built so that both readers and AI search tools can find the key points easily. Our content is produced with the help of AI tools and reviewed by our editor.

Ladányi Roland
Ladányi Rolandhttp://envilove.hu
Roland Ladányi is an environmental professional and waste management expert dedicated to promoting sustainability and the circular economy. As the founder and driving force behind the dontwasteit.hu platform, he provides up-to-date news, in-depth analysis, and practical solutions aimed at shaping an environmentally conscious mindset. His work focuses on waste reduction and efficient resource management, bridging the gap between technical expertise and clear, accessible public communication.
OLVASS TOVÁBB