KezdőlapEnglishZero waste approach could avoid 149 GtCO₂e by 2050 – what Eunomia's...

Zero waste approach could avoid 149 GtCO₂e by 2050 – what Eunomia’s COP31 report shows

If you like our site, mark us as a preferred source on Google — so you’ll see our articles more often in search!

★Mark us as a preferred source

COP31 in Antalya is the first UN climate summit to make zero waste a headline priority. To accompany that shift, Eunomia Research & Consulting and the Shape Foundation have published Our Zero Waste Future, prepared for the COP31 Climate High-Level Champion, Samed Ağırbaş, and the Turkish Zero Waste Foundation. In the report, the zero waste approach is not about fine-tuning waste management.

It means running the whole economy on less material, with longer-lasting, repairable products and far more reuse and sharing. According to the authors, if this approach is carried beyond the COP31 targets for 2035 and applied to buildings, vehicles and machinery, around 149 gigatonnes of CO₂-equivalent emissions could be avoided by 2050 – more than the entire remaining 1.5°C carbon budget.

A few days ago we covered the IEA’s report for COP31, which looked at waste reduction through an energy lens up to 2035. Eunomia’s report picks up where the energy agency stopped: it puts prevention, reuse and design for longevity at the centre and looks ahead to 2050. Here is where the 149 gigatonnes come from, which examples the report builds on, what it recommends, and what it means when read from Hungary.

In short: The zero waste approach could avoid around 149 gigatonnes of CO₂-equivalent emissions between 2025 and 2050, according to the COP31 report by Eunomia and the Shape Foundation, with annual savings reaching 9.6 gigatonnes by 2050. Of this, 37 gigatonnes are linked to municipal waste and 112 gigatonnes come from using buildings, infrastructure, vehicles and machinery for longer and more intensively. The figure is an ambitious upper-end estimate, not a forecast.

What did the COP31 Presidency commit to for 2035?

In June 2026 the Turkish Presidency announced two non-negotiated targets as part of the UNFCCC Action Agenda:

  • Zero waste and methane reduction: cut the projected increase in global municipal solid waste generation by at least 50% by 2035.
  • Green industrialisation: raise the global circular material use rate from 6.9% to at least 15% by 2035.

Citing IEA analysis, the Presidency also noted that material efficiency, recycling, better waste management and biogas could together cut energy-sector emissions by more than 1.5 gigatonnes a year by 2035.

Eunomia calls these targets “stepping stones” and proposes a next step for each. For the waste target, that means sound waste management for all, plus reuse and product durability across every sector. For the circularity metric, the authors suggest weighting it by carbon, so that recycled steel and aluminium count for what they actually save – in a purely mass-based indicator, a tonne of gravel weighs the same as a tonne of aluminium.

Why clean energy alone is not enough: the climate footprint of materials

The report’s starting point is that the energy transition is essential but cannot carry the load alone. Producing basic materials – steel, cement, plastics, aluminium, paper and glass – including the energy used, caused 11.8 gigatonnes of CO₂-equivalent emissions in 2018, roughly a fifth of global greenhouse gas emissions.

That is the narrowest boundary: add food and agriculture and the share rises to around 45%, include the extraction and processing of every resource and it exceeds 55%, and allocate supply chains and use-phase energy to what we consume and it reaches about 70%. Eunomia deliberately uses the narrowest, 20% boundary, because it can be traced material by material without double counting.

The trend is worrying. Emissions from material production rose from about 5 to 11 gigatonnes between 1995 and 2015, an increase of 120%, lifting their share of global emissions from 15% to 23%. China’s rapid economic transition accounted for three quarters of that growth, and building or replacing capital stock – buildings, infrastructure, machinery – now drives 60% of material-related emissions. On current trends, between 2020 and 2050 steel demand rises by about a third, cement by almost half and aluminium by four fifths, while primary plastics production more than triples at 4% annual growth.

From a carbon budget perspective, the picture is sharper still. On today’s path, the four main materials – plastics, cement, steel and aluminium – would emit 348 gigatonnes in total by 2050. Industry decarbonisation pathways (clean power, hydrogen, carbon capture) would bring that down to 176 gigatonnes, a saving of 172 gigatonnes. That would be an enormous achievement, yet what remains still exceeds the roughly 130 gigatonnes of CO₂ left in the 1.5°C budget from the start of 2025. According to the report, that budget will run out around 2028 at current rates, so overshoot is all but certain; the question now is how far, and for how long.

Decarbonisation also requires a vast build-out. Near-zero steel alone could need up to 6,700 terawatt-hours of clean electricity and 75 million tonnes of hydrogen a year by 2050 – roughly a quarter of today’s global electricity generation. Every tonne of material that does not need to be made shrinks that task. The authors therefore treat using less material and decarbonising production as mutually reinforcing levers rather than alternatives.

Municipal waste: the tip of the iceberg

Part 1 of the report deals with municipal waste, the part of the materials economy everyone encounters every day. Eunomia’s own model, covering 217 countries and 18 material streams, estimates that 2.76 billion tonnes of municipal waste were generated in 2025, rising to 4.09 billion tonnes by 2050 on current trends, an increase of 48%. Waste generation is estimated with a machine-learning method (a quantile regression forest) based on GDP, the share of employment in services, poverty and the weight of agriculture.

The starting point:

  • in 2025, 31% of municipal waste (around 848 million tonnes) was dumped, openly burned or lost to water;
  • 32% went to landfill, 18% to incineration, and only 20% was recycled (including reuse, composting and anaerobic digestion);
  • 2.7 billion people have no regular waste collection.

The key finding, however, is that around 70% of gross emissions linked to municipal waste arise before anything is thrown away. In 2025, making the products that later became municipal waste emitted 4.0 gigatonnes, while collection, treatment and disposal emitted 1.7 gigatonnes, of which 0.8 gigatonnes were offset by recycling, composting and energy recovery. Almost half of the production side is food. Better waste management can therefore reach mainly the smaller share.

The model runs three scenarios. On current trends, net emissions linked to municipal waste rise from 4.9 gigatonnes in 2025 to 7.2 gigatonnes in 2050. Better waste management delivers about 1.1 gigatonnes a year by 2050, and reduction and reuse a further 2.1 gigatonnes. Combined, emissions peak around 2030 and fall to 4.0 gigatonnes by 2050 – 44% below the baseline and below today’s level. Cumulatively, that is 37 gigatonnes avoided between 2025 and 2050: 13 gigatonnes from sound waste management for all, 12 from preventing food waste and 12 from reuse, repair and sharing of other products.

Food and garden waste matter most. In the model they make up 49% of municipal waste (the World Bank puts the figure at 38%): 1.35 billion tonnes in 2025, of which only 185 million tonnes were composted or anaerobically digested. On current trends this would grow to 1.88 billion tonnes by 2050; with prevention, separate collection and treatment it could fall to 1.21 billion tonnes, while composting and digestion rise to 549 million tonnes. The authors warn that extending collection moves waste from dumps into landfill, where methane rises unless food waste is collected separately and landfill gas is captured. For the EU’s latest food waste figures, see our guide to Eurostat’s 2024 data.

The report also applies the climate diplomacy principle of “common but differentiated responsibilities”. Per person, high-income countries use six times more materials and produce three times more municipal waste than low-income countries. In the combined scenario, waste per person falls by about 40% in high-income countries by 2050 (from 1.51 to 0.92 kg a day) and by about 15% in upper-middle-income countries, while it still grows in low-income countries as they develop. The threefold gap narrows to about 1.5-fold.

Finally, the report stresses that municipal waste is only the tip of the iceberg. The global economy uses around 106 billion tonnes of materials a year; 26 billion tonnes become waste, and only 2.8 billion tonnes are municipal waste. Most paper, glass and plastics pass through municipal waste, but for metals and concrete the opposite is true: around 83 million tonnes of metal are collected in municipal waste, while some 1,975 million tonnes of steel and aluminium are made every year. Only 15–21% of material production emissions sit in products that become municipal waste.

Where the big numbers are: buildings, vehicles and machinery

Seventy-seven percent of material production emissions go into durable goods: 42% (5.0 gigatonnes) into construction and 35% (4.1 gigatonnes) into machinery, vehicles, metal products and electronics. Ninety-four percent of cement emissions go to construction. These goods stay in use for decades, so their design, specification and lifetime are among the most consequential climate decisions. The centre of gravity is also shifting geographically: the share of building material emissions from low- and lower-middle-income regions could rise from 22% to 51% by 2060.

Part 2 builds on a 2021 study by Pauliuk and colleagues, which found that longer lifetimes, more intensive use, lighter design and reuse could save 20–52 gigatonnes in residential buildings and 13–26 gigatonnes in passenger cars by 2050, cutting the emissions from making their materials by 33–67%. Eunomia applies the upper, two-thirds rate to all durable goods, phased in from 2025 and fully in place by 2040 – which gives the 112 gigatonnes. By sector: 61 gigatonnes from buildings and infrastructure, 36 from machinery and metal products, 10 from vehicles and 4 from electronics. The lower rate would give 56 gigatonnes for Part 2.

A few illustrations from the report: in one Danish study, demolishing and rebuilding a structure used nineteen times more material than deep renovation; shared mobility could serve Lisbon’s daily travel needs with just 3% of today’s car fleet; and doubling the number of times clothing is worn could cut the sector’s emissions by around 44%.

The authors are candid about the overlap. A high-circularity steel pathway avoids around 19 gigatonnes relative to business as usual, but only about 9 gigatonnes once steel production is decarbonised. The savings of the two levers cannot simply be added – but together they make the task smaller, cheaper and faster.

What the zero waste approach looks like in practice: six sectors

Part 3 shows, across six sectors, what an economy built on less material looks like. The common message: most of the solutions already exist and work; their climate benefits simply do not show up in national accounts.

Food

Around 1.05 billion tonnes of food were wasted at consumer level in 2022, 19% of the food available to consumers; together with losses earlier in the supply chain, this generates 8–10% of global emissions. In Nigeria, ColdHubs’ solar-powered cold rooms extend the shelf life of perishables from two to 21 days; by 2024, 58 cold rooms and 10 refrigerated trucks served more than 11,100 farmers, retailers and wholesalers, whose average monthly incomes doubled. In the UK, WRAP’s voluntary agreement uses a “Target, Measure, Act” method to halve food waste by 2030.

Packaging

Packaging makes up 40% of the world’s plastic waste. German mineral water bottlers fill more than 6.8 billion identical pool bottles a year, which average 42 refills; CHEP circulates around 348 million pallets and crates across some 60 countries. In Jakarta, Alner replaces single-use sachets with returnable bottles sold through more than 200 neighbourhood shops, mostly run by women. In Aarhus, a single shared deposit cup system used by more than 50 cafés got back over one million cups in 17 months at an 85% return rate. According to the authors, scaling reuse starts with harmonising formats and return systems, at least at city level.

Textiles

Some 82 million tonnes of textiles end up in municipal waste each year. Around 15 million second-hand garments arrive at Kantamanto market in Accra every week, and about 30,000 traders, tailors and upcyclers put roughly 25 million a month back into use. Patagonia resells nearly 160,000 used items a year, and ThredUp runs resale as a service for more than 60 brands. According to the report, 100 second-hand garments replace 60 to 85 new ones.

Electronics

In 2022, 62 million tonnes of e-waste were generated, with only 22% documented as collected and recycled; about a third, some 21 million tonnes, ends up in municipal waste. Turkish manufacturer Beko refurbished more than 114,000 appliances in 2024 at centres in the UK, Italy and Romania, reselling them at up to 30% below the price of new; it has run refurbishment in Türkiye since 1997. Back Market has sold more than 30 million refurbished devices across 17 markets, and iFixit publishes more than 115,000 free repair guides. We have looked at the role of design in our article on why the concept of planned obsolescence needs rethinking, and at what our devices contain in our piece on critical raw materials in households.

Transport

In 2025, BlaBlaCar filled empty seats for 150 million passengers across 21 countries, saving drivers €568 million in fuel and tolls. Belgium’s Cambio ran 3,000 shared cars in 152 towns, making almost 1.2 million trips, each car replacing up to 13 private ones. Since 2003, Bremen has turned on-street parking into more than 150 “mobil.punkt” sharing stations, where each shared car replaces about 18 private cars. In England, the average car or van is driven just 4% of the time.

Construction

Since 2021, São Paulo has used tax and planning incentives to convert old, often empty buildings in its historic centre into homes: 49 buildings are being converted, with the potential to deliver 5,238 homes, and 15 are already finished. The Danish study mentioned above modelled a 1970s apartment block five ways: renovations used 9–33 kg of new material per square metre, while demolition and rebuilding used 633 kg and produced more than twice the lifetime emissions of the best renovation. With public bodies buying 40–60% of concrete, green public procurement becomes a key lever.

The economics: €25.4 trillion lost every year

Citing Circle Economy and Deloitte’s Circularity Gap Report 2026, the report states that the linear economy loses around €25.4 trillion of value a year, about 31% of global GDP. The largest items are products and materials discarded while they still have value (€10.0 trillion), energy lost between extraction and use (€8.7 trillion), and buildings, infrastructure and machinery wearing out faster than necessary (€5.2 trillion). Food lost or wasted is worth about €650 billion. The authors note that these are indicative upper-bound estimates, not net of transition costs.

Low-carbon materials are cheap per product: near-zero steel would add about 0.5% to the price of a car and 2.1% to the cost of a building in 2030, and near-zero concrete 1.5–3% to building costs. The challenge is not the unit price but the enormous energy and infrastructure build-out behind it. Reuse, repair and sharing, by contrast, shift spending from new materials towards local services, maintenance and logistics – which, the report argues, makes this a cost-of-living policy as well as a climate one. On the skills these jobs require, see our coverage of circular skills.

Six recommendations beyond the 2035 targets

The authors stress that none of their recommendations requires a new negotiated outcome; all can be taken forward through the Action Agenda, Nationally Determined Contributions (NDCs), cities and national policy.

  1. Count what reuse, repair and sharing save: shared methods are needed so that these avoided emissions can be included in national climate plans.
  2. Build on the 2035 targets: sound waste management for all, separate food waste collection, a role for informal recyclers, and a published baseline for the waste target with regular progress reporting.
  3. Scale what works: coordinate globally to scale proven models, remove legal, competition and cultural barriers, and set up pre-competitive platforms for shared standards, formats and infrastructure.
  4. Share responsibility fairly: higher-income countries lead on cutting material use, while concessional climate finance supports systems in lower-income countries.
  5. Value existing practice: fund and give real decision-making power to the reuse and repair economies of the Global South, informal economies and indigenous communities, including through the Belém–Antalya Mechanism.
  6. Design for longevity: durability and repairability standards, whole-life carbon in decision-making, and procurement that rewards long life.

For the push towards harmonised EU rules on extended producer responsibility, see our article on the industry’s joint EPR statement.

What does this mean for Hungary?

The report is global, publishes no country-level results and does not analyse Hungary by name. Its model logic nevertheless points to a few conclusions.

Hungary is classified as a high-income country by the World Bank, which places it in the group for which the scenario expects the largest reduction in waste per person – around 40% by 2050. For high-income countries, the model assumes reductions by 2050 of 56% for food and other organic waste, 57% for plastics, 50% for paper, glass and textiles and 30% for electrical and electronic equipment, compared with the baseline. That is considerably more ambitious than the current EU framework: the EU’s 2035 targets – 65% recycling and no more than 10% landfill – concern how waste is managed, not how much is generated.

The second lesson concerns organic waste. According to the report, extending collection can on its own increase methane emissions if biowaste goes to landfill. In Hungary, most residual waste is still landfilled, so preventing food waste, collecting it separately and capturing landfill gas are tangible climate items. How far the country is from the EU’s 2035 targets is shown in our article on the University of Pannonia’s network model of municipal solid waste management.

The third is harmonised formats. The report points to Germany’s pool bottle system and Aarhus’s cup scheme as proof that reuse works when shoppers can return packaging anywhere. Hungary has operated a mandatory deposit return system since 2024, showing that a uniform national return infrastructure can be built quickly – a natural next step would be to let reusable packaging rely on it to a greater extent.

Finally, construction: the report calls for whole-life carbon limits and for renovation to become the default. The revised EU Energy Performance of Buildings Directive already requires the life-cycle emissions of new buildings to be calculated, which will shape design and procurement practice in Hungary too.

A critical reading: what to treat with caution

The report is transparent and sets out its sources and methods in detail. A few limitations are worth keeping in mind – some of which the authors flag themselves.

  • 149 gigatonnes is an ambitious upper-end estimate. The 112 gigatonnes of Part 2 extend a two-thirds savings rate derived for homes and cars to all durable goods and assume it is fully achieved by 2040. With the lower rate, Part 2 would be 56 gigatonnes and the total around 93 gigatonnes.
  • Savings are measured at today’s emissions intensity. As production gets cleaner, each avoided tonne is worth less in climate terms – the steel example (9 instead of 19 gigatonnes) shows the overlap clearly.
  • The comparison with the carbon budget is indicative. The 130-gigatonne budget covers CO₂ only, while the savings are expressed in CO₂-equivalent, including methane.
  • The model outputs are preliminary. According to the references, the outputs of Eunomia’s municipal waste model are preliminary results from October and November 2026, and the material emissions data are based on 2018. For recycled materials, the model uses a substitution ratio of 1.0, an upper-bound assumption.
  • Minor internal inconsistencies. Municipal waste in 2025 is given as both 2.76 and 2.8 billion tonnes, and mismanaged waste as both 845 and 848 million tonnes; the annual saving from reuse appears as 2.5 gigatonnes in one place and 2.1 gigatonnes in the model chart. The 49% share of food and garden waste is well above the World Bank’s 38%, and the 31% mismanaged share is below UNEP’s 38%.
  • The sources are not fully independent. The model is anchored to the World Bank’s What a Waste 3.0 data, whose lead author, Ed Cook, is also the first author of the Eunomia report. The report was commissioned by the Zero Waste Foundation, which is closely linked to the COP31 Presidency, while Türkiye faces criticism over its plastic waste imports – see our coverage of Greenpeace’s Trojan Horse action at COP31 and of record EU plastic waste exports to Türkiye.

In the report’s favour, it consistently puts prevention and reuse first, does not set them against decarbonisation, and clearly ranks waste treatment – including energy recovery – below prevention. For the state of incineration capacity in Europe, see our analysis of incineration overcapacity.

Summary

The central message of the Eunomia and Shape Foundation report is that waste only becomes visible where material use ends – the real opportunity lies upstream, in how products and buildings are designed, how long they last and how intensively they are used. The COP31 targets for 2035 are an important first step, but the big numbers come from buildings, infrastructure, vehicles and machinery. The zero waste approach is therefore not just another waste management programme but the material-side counterpart of climate policy.

The 149 gigatonnes are an upper-end estimate, and delivery depends on whether governments count the climate benefits of reuse and repair and build durability into regulation and procurement. As the authors put it, twenty-five years is long enough for the unimaginable to become ordinary.

More coverage is available in our English news section.


Frequently asked questions: the zero waste approach in Eunomia’s report

How much could a zero waste approach save in emissions by 2050?

According to Eunomia, around 149 gigatonnes of CO₂-equivalent between 2025 and 2050. Of this, 37 gigatonnes are linked to municipal waste – better waste management, less food waste and more reuse – and 112 gigatonnes come from using materials better in buildings, infrastructure, machinery and vehicles. Annual savings would reach 9.6 gigatonnes by 2050, more than today’s global transport emissions.

What are the COP31 Presidency’s zero waste targets for 2035?

There are two. The first is to cut the projected increase in global municipal solid waste generation by at least 50% by 2035. The second is to raise the global circular material use rate from 6.9% to at least 15% by 2035. Both were announced as non-negotiated targets within the UNFCCC Action Agenda rather than through formal negotiations.

Why is decarbonising material production not enough on its own?

Because cleaner production has consistently been outpaced by growth in volume. According to the report, steel, cement, aluminium and plastics would emit 348 gigatonnes by 2050 on today’s path. Even with fully decarbonised production, 176 gigatonnes would remain – more than the roughly 130 gigatonnes of CO₂ left in the 1.5°C budget from the start of 2025.

Where do most emissions linked to municipal waste come from?

From making the products. In 2025, producing the goods that later became municipal waste emitted about 4.0 gigatonnes, while collection, treatment and disposal emitted 1.7 gigatonnes, of which 0.8 gigatonnes were offset by recycling and energy recovery. Around 70% of gross emissions therefore arise before anything is thrown away, and almost half of that is food.

What does Eunomia’s report recommend to governments?

Six steps: shared methods to count the emissions avoided by reuse, repair and sharing in national climate plans; sound waste management with separate food waste collection; global coordination to scale proven models; a fair sharing of responsibility; support for existing reuse and repair practice; and durability and repairability standards with procurement that rewards long product life.

How reliable is the 149-gigatonne estimate?

It is best read as an ambitious upper-end estimate. The 112 gigatonnes of Part 2 apply a two-thirds savings rate, derived for homes and cars, to all durable goods; the lower rate would give 56 gigatonnes. The calculation uses today’s emissions intensity, so it partly overlaps with decarbonising production, and the model outputs are preliminary.


🔗 Official sources and references: 👉

Consistent structure, quick answers: every article is built so that both readers and AI search tools can find the key points easily. Our content is produced with the help of AI tools and reviewed by our editor.

Ladányi Roland
Ladányi Rolandhttp://envilove.hu
Roland Ladányi is an environmental professional and waste management expert dedicated to promoting sustainability and the circular economy. As the founder and driving force behind the dontwasteit.hu platform, he provides up-to-date news, in-depth analysis, and practical solutions aimed at shaping an environmentally conscious mindset. His work focuses on waste reduction and efficient resource management, bridging the gap between technical expertise and clear, accessible public communication.
OLVASS TOVÁBB